PVC Plumbing Fittings

Tees & Y-Tees

Four-way tee for joining two crossing pipe runs.

• Material: uPVC
• Joint Type: Solvent weld

Bends & Elbows

45° PVC bend for gentle direction changes. 110mm also available in L pattern.

• Material: uPVC
• Joint Type: Solvent weld

Bends & Elbows

Solvent-weld PVC bend for changing pipe direction in plumbing and drainage runs.

• Material: uPVC
• Joint Type: Solvent weld

Bends & Elbows

L-pattern PVC bend for 63mm and 110mm pipe runs.

• Material: uPVC
• Joint Type: Solvent weld

Bends & Elbows

P-pattern PVC bend for 63mm to 110mm pipe runs.

• Material: uPVC
• Joint Type: Solvent weld

Reducers & Bushings

Reducing bushing that fits into a larger socket to step down pipe size.

• Material: uPVC
• Joint Type: Solvent weld

Drainage & Waste Fittings

Clean-out fitting for rodding and inspecting drainage lines. 160mm also available in a short pattern.

• Material: uPVC
• Joint Type: Solvent weld

Couplings & Sockets

Straight coupling for joining two lengths of PVC pipe.

• Material: uPVC
• Joint Type: Solvent weld

End Caps, Plugs & Vent Caps

End cap to seal the end of a PVC pipe run.

• Material: uPVC
• Joint Type: Solvent weld

End Caps, Plugs & Vent Caps

L-pattern end cap for larger-diameter pipe runs.

• Material: uPVC
• Joint Type: Solvent weld

Drainage & Waste Fittings

Expansion joint that absorbs thermal movement in long drainage runs.

• Material: uPVC
• Joint Type: Solvent weld

Drainage & Waste Fittings

Floor drain for bathrooms, kitchens and utility areas.

• Material: uPVC
• Joint Type: Solvent weld

Threaded (Forcet) Fittings

Bend with a threaded outlet for taps and fixtures. Short and long patterns in 20mm.

• Material: uPVC
• Joint Type: Solvent weld

Threaded (Forcet) Fittings

Socket with a threaded outlet for taps and fixtures.

• Material: uPVC
• Joint Type: Solvent weld

Threaded (Forcet) Fittings

Tee with a threaded outlet for taps and fixtures.

• Material: uPVC
• Joint Type: Solvent weld

Reducers & Bushings

Reducer for connecting pipes of different diameters.

• Material: uPVC
• Joint Type: Solvent weld

Bends & Elbows

Long-sweep PVC bend for smooth flow in drainage lines. 110mm also available in a short pattern.

• Material: uPVC
• Joint Type: Solvent weld

Couplings & Sockets

Straight socket for joining pipe ends in plumbing lines.

• Material: uPVC
• Joint Type: Solvent weld

Tees & Y-Tees

Swerve tee for offset branch connections in drainage pipework.

• Material: uPVC
• Joint Type: Solvent weld

Unions & Tank Connectors

Tank connector for connecting pipework to water tanks.

• Material: uPVC
• Joint Type: Solvent weld

Tees & Y-Tees

Equal PVC tee for branching pipe runs in water supply and plumbing.

• Material: uPVC
• Joint Type: Solvent weld

Tees & Y-Tees

P-pattern PVC tee for 63mm to 110mm pipe runs.

• Material: uPVC
• Joint Type: Solvent weld

End Caps, Plugs & Vent Caps

Threaded plug to close off threaded outlets.

• Material: uPVC
• Joint Type: Solvent weld

Threaded (Forcet) Fittings

Threaded bushing for converting solvent-weld sockets to threaded connections.

• Material: uPVC
• Joint Type: Solvent weld

Drainage & Waste Fittings

U-trap that holds a water seal to block drain odours.

• Material: uPVC
• Joint Type: Solvent weld

Drainage & Waste Fittings

U-trap with a cleanout access point for easy clearing of blockages.

• Material: uPVC
• Joint Type: Solvent weld

Unions & Tank Connectors

Union for easy disconnection of pipework at pumps, tanks and valves.

• Material: uPVC
• Joint Type: Solvent weld

Threaded (Forcet) Fittings

Socket for connecting valves and threaded components to PVC pipe.

• Material: uPVC
• Joint Type: Solvent weld

End Caps, Plugs & Vent Caps

Vent cap for the top of vent and drainage stacks.

• Material: uPVC
• Joint Type: Solvent weld

Tees & Y-Tees

Y-tee for angled branch connections that keep flow smooth.

• Material: uPVC
• Joint Type: Solvent weld